Yes, the Curt Trailer Hitch # C12172 will fit your 2018 Lexus NX 300 with the F Sport package. If you don't already have the trailer hitch then I actually recommend going with the Curt # C13337 instead because it has a 2" hitch receiver that will be compatible with a wider variety of accessories. I have attached an installation video that you can check out.
These are the only 2 hitches available for your Lexus NX 300 so there isn't anything with the hidden crosstube like what you're referring... view full answer...
I have a hitch bike rack recommendation for you. This rack will work if you are transporting bikes that do not have fenders. The RockyMounts WestSlope Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount, part # RKY10222, weighs 36 lbs. It secures your bike without touching the bike frame.
If your bike has fenders, the Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting, part # C18085, is a fairly lightweight hitch bike rack, 46 lbs. It is also fender friendly.
The... view full answer...
For your 2021 Lexus NX 300 both the Curt hitch part # C13337 and the Draw Tite part # 75956 are a confirmed fit for your vehicle. Either would work great but I would go with the Curt over the Draw Tite since it has higher towing capacities. view full answer...
Yes it does! I checked directly with the manufacturer for you and verified the Curt hitch you mentioned is a fit for your 2021 Lexus NX 300 F-Sport:
- Curt Trailer Hitch Receiver # C13337
The # C13337 is a nice choice for a hitch and is a simple, bolt-on installation that does not require any type of drilling into the frame of your Lexus or cutting/trimming of its bumper or fascia.
I also wanted to mention, just in case you were going to use this hitch for towing, that if you need a... view full answer...
The trailer hitch I strongly recommend for your 2020 Lexus NX 300 is the Curt Trailer Hitch Receiver # C13337 because it is a complete and simple bolt-on install that does not require any drilling into your vehicle's frame to install, and because it has the highest capacities of the trailer hitches that fit your vehicle. The Curt hitch will fit a 2020 Lexus NX 300 as well as the 2020 Lexus NX 300h,
This is a Class III hitch with a 2" receiver and has a robust 525 lb tongue weight capacity... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13337 and Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75956 are both confirmed to fit your 2019 Lexus NX 300. Both offer very similar fitment and we have not had the pleasure of testing both of these receivers on the 2019 Lexus NX 300 so it is difficult to say which one would offer more ground clearance.
That said, we have been able to test the Curt on this vehicle and we measured 12-1/2" from... view full answer...
When measuring your crossbars to determine if the Thule Pulse Medium Rooftop Cargo Box - 14 cu ft - Matte Black # TH614 will fit on your 2021 Lexus NX 300 you'll measure from the center of one crossbar to the center of the other (center on center). You will need at least 23-5/8" apart but no more than 33-3/8" apart. view full answer...
We do have a trailer hitch receiver that fits your 2020 Lexus NX 300, the Curt Trailer Hitch Receiver # C13337.
I verified this fit for your '20 NX 300 with the manufacturer. I have also added a link to the instructions and a video install of this hitch being put on a similar model year NX 300. Additionally, if you are looking for trailer wiring the correct wiring harness is the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. view full answer...
Actually we do list the Curt trailer wiring part # C56268 as a confirmed fit for the 2018 Lexus NX 300 now. You may have bought this before the fit was updated but currently we have this as a fit for the 2018 model. view full answer...
The Erickson Over-The-Cab Truck Bed Ladder Rack part # EM07707 is designed to work with chest style toolboxes such as the DeeZee Red Label Truck Bed Toolbox part # DZ8546B. In order to use this ladder rack with a crossover style toolbox like the DeeZee Specialty Series Truck Bed Toolbox part # DZ6170NB the toolbox will need to be moved toward the tailgate about 12-16" to allow for the ladder racks mounting feet to mount. view full answer...
We haven't had any reports regarding the hands-free liftgate not working on a 2020 Lexus NX 300 once the Curt # C12172 hitch was installed. If there will be any interference, it'll be right where the receiver tube is located. If you try waving your foot in the area a few inches right of left of the receiver opening, the sensors will pick up the movement of your foot and the hatch will open for you.
Then for a wiring harness you'll need the Curt T-Connector Vehicle Wiring Harness with 4-Pole... view full answer...
The Curt Trailer Hitch Receiver # C13337 is a confirmed fit for all models of NX300T including the F-Sport for model years 2015-2017 according to my contact at Curt. They have not tested the hitch on that particular 2018 model yet but are confident it will fit. view full answer...
Yes, the Curt trailer wiring harness part # C56268 that you referenced is a confirmed fit for your 2020 Lexus NX 300 F Sport front wheel drive. view full answer...
I have confirmed with Draw-Tite that # 75956 is actually not a fit for your vehicle. The Curt Trailer Hitch Receiver Class II 1-1/4" # C12172 that you mentioned is a confirmed fit for your vehicle, however, I recommend going with the Curt Trailer Hitch Receiver Class III - 2" # C13337 instead. I recommend this receiver because it is 2", which will offer a larger variety of accessories and applications that can be mounted to it. This is confirmed to work with kick sensors, so that will not... view full answer...
Demco's warranty states "Your Demco Kar Kaddy is warranted to be free from defects in materials and workmanship under normal use and service for a period of one year after date of purchase by the original (first) retail owner, or until it is resold or transferred by the original owner. Hubs used on the KK370SB are warranted for a period of three years after the date of purchase by the original (first) retail owner or until it’s resold or transferred by the original owner. Tires and lights... view full answer...
Yes, I can confirm that the Curt Trailer Hitch Receiver 2" item # C13337 does fit the 2022 Lexus NX 300 F Sport model. If you are in need of a wiring harness I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118652. The T-One connector plugs directly into existing wiring giving you a 4-flat connector to control your trailer's lighting functions. view full answer...
Yes, I checked with Yakima just now and they confirmed that their Yakima SkyBox NX 16 Roof Cargo Box # Y95AV does fit the OEM crossbars of your 2020 Lexus NX 300. view full answer...
Yes, the Thule Easyfold XT bike rack part # TH903202 does fit the Curt hitch part # C13337 of your 2019 Lexus NX300 directly without requiring any adapters. view full answer...
We have the Yakima SightClip Fit Kit # Y59AR which is the correct fit kit for your 2018 Lexus NX 300 with flush mounted rails. The rest of the parts needed are the Jetstream Crossbars # Y00425 and Towers # Y64AR. view full answer...
As the Curt hitch # C13337 will install in the same place as the lift gate kick sensor, it will limit its usability to either side of the receiver tube. This will end up happening with pretty much all hitches installed on vehicle with this sensor. However, it does not mean it will no longer work, but you will just need to find the sweet spot where it is easy to get to again. view full answer...
Go To Results